Tech Grands

Information of Web

How to Fix DNS_PROBE_FINISHED_NXDOMAIN Error in Google Chrome

The dns_probe_finished_nxdomain mistake is not uncommon from Google Chrome users on Windows 7, Windows 8.1 and Windows 10. The error doesn’t happen on all of the web browsers but is largely restricted to Google Chrome. If this error happens in your own Chrome browser, then you won’t confront this mistake on Mozilla Firefox or Internet Explorer in exactly the exact same moment.

But sometimes, you might be unable to get any browser on your computer, be it Mozilla Firefox, Internet Explorer or even Google Chrome.

The dns_probe_finished_nxdomain usually happens because the DNS lookup has failed while obtaining the webpage.

This mistake in Google could be a temporary one. If so, a simple restart may resolve this mistake. Otherwise, you might have to adhere to a few additional measures to tackle this mistake.

Another cause of this mistake may be your VPN link or your own antivirus. Disabling them can also solve this error. Another frequent solution for this mistake is to flush out the DNS host or to alter the DNS server on your computer.

As there’s not any single remedy for this mistake, we’ll be attempting each available system to repair the dns_probe_finished_nxdomain mistake in Windows 10.


Below I’ve listed 7 approaches to repair DNS_probe_Finished_NXDOMAIN malfunction in Google Chrome. Do follow all of the methods till you’ve got the problem solved.

Method 1: Restart Your PC

As I mentioned before, the dns_probe_finished_nxdomain mistake might be a temporary error and could be solved with a simple restart.

Thus, shut Google Chrome browser should you have it available. Close all of the open apps on your computer and restart it. Following the restart, link to the web and attempt to get any webpage on Google Chrome. If the restart has solved the mistake, you do not have to anything else on your computer.

Method 2: Restore Google Chrome to Default Settings

The mistake “DNS probe completed nxdomain” may also be repaired by resetting your own Chrome settings to default preferences. To do so follow the actions given below.

Open Google Chrome and from the address bar type “Programmer://flags/” and hit enter.

It’ll open the “Chrome experimentation” section. In the ideal side, you can observe a “Reset all to default” button. Click on “reset all to default” and restart your Chrome browser.

Clicking on “Reset all to default” will reset your own Chrome settings to the default condition. Now try opening the webpage which was providing the “DNS probe completed nxdomain” mistake and see whether the error was solved.

Method 3: Merge The DNS

After restarting your PC, In the event the error didn’t appear instantly, it might come back after several hours of use. Some customers have reported that, after restarting the PC, the Google Chrome browser works good. But following a couple of hours of use, the dns_probe_finished_nxdomain mistake occurs again. It always occurs with each restart.

Now to solve this error, it is possible to attempt flushing the DNS and see whether it can solve the error.

To flush out the DNS, start elevated command prompt (command prompt as admin).

To perform this Press Windows key + X and choose Command prompt (admin). Or Right-click on Star button and choose ” Command Prompt (Admin)“.

If not media Windows Key + R and kind cmd from the Run dialog box. Alternately, search cmd from the search bar, right click on cmd.exe and choose Run as Administrator.

When the command prompt window opens, type the following command and then hit enter.

Netsh winsock reset catalog

Following the execution of this command, reboot your PC. Try opening Google Chrome and attempt to get the webpage. Typically, this should correct the dns_probe_finished_nxdomain mistake.

Strategy 4: Change the DNS Setting and Server

When flushing the DNS did not solve the error, then you might want to modify the DNS settings and then change the DNS server into another person. This is how to get it done.

Step 1: Open Network and Sharing Center

There are two methods to get into the Network and sharing facility section.

  1. Visit Control Panel, click “Network and Internet” and then click on Network and Sharing Center.2. Click on Network icon on your taskbar and choose “Open Network and Sharing Center”.

Measure 4: Change DNS Settings

In the Network and Sharing Center segment, click on “Change adapter configurations” (left sidebar).

Now, double-click or right-click in your present active online link and choose Properties button.

Double-Click on the Internet Protocol Version 4 (TCP /IPv4) to bring up the properties window.

Now in the base of this Internet Protocol Version 4 window, then pick “Use the following DNS server address“.

Here we’ll be utilizing Google’s people DNS server address. Set records as stated below.

Preferred DNS server:
Alternate DNS server:

Click on Okay to store the configurations. Click on OK again and close the Control Panel.

Reboot (restart) your PC once. Following the reboot, start Google Chrome browser and attempt to get any page. This time, the dns_probe_finished_nxdomain mistake shouldn’t happen again.

Method 5: Restart DNS Client

Restarting the DNS client from Services may also resolve this error in Windows.

To do so, press on Windows Key + R, and kind services.msc and hit on start Services window.

From Services, locate DNS customer and right click on it. In the choices, click on “Restart”to restart the “DNS customer”. Once done, attempt to start Google Chrome and get the web page which was giving the mistake.

Method 6: Customize VPN Temporarily

In case you’ve installed some other VPN client on your computer lately, you might confront the dns_probe_finished_nxdomain mistake on your computer. The VPN client may block the DNS whilst obtaining any webpage with Google Chrome.

Everything you could do this would be temporarily disable your VPN client. If disabling VPN customer didn’t do the job, you can try uninstalling the VPN customer in the PC. Once flashed, reboot your PC and see whether the error was solved.

Method 7 : Restore Your PC

The methods mentioned previously should repair the dns_probe_finished_nxdomain mistake on your computer. Nonetheless, in the event you were not able to solve the error, you might want to restore your PC to the earlier stage.

Restoring your PC to continue restore point can correct some minor and major problems with your PC happened because of corrupt drivers or software problem or due to improper settings.

Notice: Restoring your PC to continue restore point will get rid of any applications installed after the restore point development.

So, this was all about how to repair the dns_probe_finished_nxdomain mistake in Windows 10 along with other PCs. Do let us know your ideas in the comments below.

Leave a Reply

Tech Grands © 2017
%d bloggers like this: